Avaya 580 - Manual (Page 175)

Document No. 10-300077, Issue 2 6-9
Using VLANs, Hunt Groups, and VTP Snooping
Figure 6-4. Create VLAN Web Page
3. Enter a name for the VLAN in the Name field.
4. In the ID field, enter an unused VLAN ID value (between 2 to 4094).
VLAN IDs are global and must be consistent from switch to switch,
even when switches are manufactured by different vendors.
5. See Table 6-1 to configure the Create VLAN Web page parameters:
Table 6-1. Create VLAN Web Page Parameters
Parameter Definition
Name Unique Name assigned to the VLAN in a switch. A
maximum of 31 alphanumeric characters
ID Identifier used throughout the network to identify this
VLAN. If you want ports on more than one device to
participate in a particular VLAN, you must use the same
VLAN ID to identify the VLAN on every device.VLAN ID
1 is reserved for the Default VLAN. VLAN ID 4097 is
reserved for the discard VLAN.
Note: The switch supports up to 1000 VLANs and a
maximum of 24,000 MAC Addresses. Note: In
order to support the maximum number of VLANs,
VLAN ID numbers should be chosen from the
range of 1 to 1000.
1 of 2