Avaya 580 - Manual (Page 408)

12-80 User Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Chapter 12
CLI Command To view VRRP virtual router statistics using the CLI, enter the following
command in User mode:
> show ip vrrp [cr | | ]
VRRP Configuration Considerations
Selecting VR ID
numbers for
Virtual Routers The allowable range for the VR ID of a virtual router is 1-255. For easiest
troubleshooting and identification, it is recommended that each virtual
router have a unique VR ID. Duplicate VR ID’s are allowed, however, as
long the IP Interfaces they are associated with are on different VLAN’s.
Because of this, VRRP cannot be configured in a multinetted network.
State Displays the current state of the virtual router.
·Initialize - Indicates that the virtual router is waiting
for a Startup Event. A virtual router could be in this
state due to VRRP being disabled Globally, VRRP
being disabled on the corresponding IP Interface, or
that the associated IP Interface is Down.
·Backup - Indicates that the virtual router is in the
Backup state. A virtual router in this state monitors
the availability of the Master router.
·Master - Indicates that the virtual router is in the
Master state. A virtual router in this state functions
as the forwarding router for the associated IP
Address
Date/Time of State
Change Displays the date and time when the last state change
occurred. This value is displayed in year-month-day
and hh:mm:ss.
Times this VR Became
Master Displays the number of times this virtual router
became the Master router.
Advertisements
Received Displays the number of advertisements received by
this virtual router.
Advertisements Sent Displays the number of advertisements sent by this
virtual router.
Advertisements
Received with Security
Violations Displays the number of advertisements that were
discarded by this virtual router. An advertisement is
discarded if it contains incorrect parameters.
Table 12-32. VRRP Virtual Router Statistics Web Page Fields
Parameter Definition...
2 of 2