Modifying ospf interfaces, Web agent procedure, Modifying ospf interfaces -9 – Avaya 580 User Manual
Page 471
Document No. 10-300077, Issue 2
15-9
Configuring the OSPF Routing Protocol
Modifying OSPF Interfaces
You can modify the parameters on an OSPF interface using either the Web
Agent or the CLI.
Web Agent
Procedure
To modify an OSPF interface using the Web Agent:
1. In the navigation pane, expand Routing > IP > Configuration folders.
2. Click Interfaces.
The IP Interfaces Web page is displayed in the content pane.
3. Select the Select check box for the interface that you want to modify.
4. In the Admin. State column for the interface that you want to modify,
select DOWN.
This step disables the interface and must be performed before you
perform any OSPF modifications.
5. Click Apply.
6. In the navigation pane, expand the Routing > IP > OSPF folders.
7. Click Interfaces.
The OSPF Interfaces Web page is displayed in the content pane
(
).
Figure 15-4. OSPF Interfaces Web Page
8. Select the Select check box for the interface that you want to modify.
9. Modify the OSPF interface as necessary. See
for an
explanation of each field on this Web page.
10. Click Apply.