Encryption ciphers, User authentication, Procedures – Avaya 580 User Manual
Page 116: Enabling ssh on a tcp port, Web agent procedure, Enabling ssh on a tcp port -4
4-4
User Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Chapter 4
Encryption
Ciphers
The Avaya Multiservice switch supports Blowfish and 3DES encryption
ciphers. When the client connects to the host, the client supplies a list of
ciphers that it supports. The server selects the strongest common cipher.
You can also configure the Avaya Multiservice switch to force use of a
single cipher.
User
Authentication
The Avaya Multiservice switch supports only password authentication.
Each login attempt requires a username and password authentication for
logging onto the switch.You can also use a RADIUS server for remote
password authentication over a network. User authentication occurs after an
SSH session is successfully established.
The switch supports a maximum of seven client and server SSH sessions
running simultaneously. All connections require password authentication.
Procedures
This section provides the following procedures:
■
■
■
■
■
■
■
Enabling SSH on a TCP Port
Before you can enable SSH, you must disable the Telnet port. You can,
however, change the SSH port without disabling SSH. Valid SSH ports are
22 and 9000 to 65,535.
Web Agent
Procedure
To enable SSH:
1. In the navigation pane, expand the System > Administration folders.
2. Click TCP Ports. The TCP Ports Web page is displayed in the content
pane.