Cli command, Viewing appletalk route table statistics, Web agent procedure – Avaya 580 User Manual
Page 572: Viewing appletalk route table statistics -28
19-28
User Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Chapter 19
CLI Command
To view the AppleTalk Interface statistics table using the CLI, enter the
following command:
>
show appletalk route
Viewing AppleTalk Route Table Statistics
You can view AppleTalk route table statistics using either the Web Agent or
the CLI.
Web Agent
Procedure
To view AppleTalk route table statistics using the Web Agent:
1. In the navigation pane, expand the Routing > AppleTalk > Display
folders, and then click Route Table Statistics.
The AppleTalk Route Table Statistics Web page is displayed in the
content pane. See
Figure 19-22. AppleTalk Route Table Statistics Web Page
Owner
Displays the AppleTalk component responsible for the
addition of the route.The options include:
• Local
• Static
• RTMP
Next Hop
Displays the next hop address where forwarded packets
are routed.
Interface
Displays the Appletalk interface associated with the
route table entry.
Zones
Displays the zones associated with the selected
AppleTalk route.
Table 19-7. AppleTalk Route Table Parameters
Parameter
Definition
2 of 2