Cli command, Managing the lgmp server, Configuring the lgmp server – Avaya 580 User Manual

Page 600: Web agent procedure, Managing the lgmp server -22, Configuring the lgmp server -22

20-22

User Guide for the Avaya P580 and P882 Multiservice Switches, v6.1

Chapter 20

3. Click:

—

CLEAR to clear the statistics.

—

REFRESH to refresh the contents of the table.

CLI Command

To view IGMP snooping statistics, use the following CLI command:

show igmp-snooping statistics

Managing the LGMP Server

This section provides the following procedures for managing the Lucent
Group Management Protocol (LGMP) Server:

■

■

■

Configuring the LGMP Server

You can configure the LGMP server using either the Web Agent or the CLI.

Web Agent
Procedure

To configure the LGMP server using the Web Agent:

1. In the navigation pane, expand the L2 Switching > Intelligent

Multicast folders, and then click LGMP Server.

The LGMP Server Configuration Web page is displayed in the content
pane. See

*Note: You must enable intelligent multicasting on a global basis

to activate the LGMP Server. LGMP serving is only
active on VLANs with an IGMP interface enabled and
IGMP snooping globally enabled.

This manual is related to the following products: