Avaya 580 - Manual (Page 263)

Document No. 10-300077, Issue 2 8-41
Configuring Ports
Viewing Switch Port Settings
You can view switch port parameters through either the Web Agent and the
CLI.
Web Agent
Procedure To view switch port parameters using the Web Agent:
1. In the navigation pane, expand the Modules & Ports folder, and then
click Configuration. The Module Information Web page is displayed in
the content pane. See
Figure 8-2 .
2. Select the switch ports for that module from the Switch Ports column.
The Switch Ports Web page is displayed.
3. See Table 8-10 for more information about the Switch Port Web page
parameters:
Table 8-10. Switch Port Parameters
Parameter Definition
Links Displays associated Web pages.
Port Displays the port associated with the selected
module.
Name Displays the port name and displays the Switch
Port Configuration Web page for the selected
module.
Port VLAN Displays the port VLAN for the selected
module.
VLAN Classification Displays the port VLAN classification for the
selected module.
Trunk Mode Displays the port’s trunk mode for the selected
module.
Hunt Group Displays the hunt group of which the port is a
member for the selected module.
STAP Mode Displays whether the spanning tree algorithm
protocol is enabled or disabled for the selected
module.
MAC Address Displays the port’s MAC address for the selected
module.