H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 99)

13-3
Saving the configuration takes a period of time.
The system does not support the operation of saving configuration of two or more consecutive
users. If such a case occurs, the system prompts the latter users to try later.
Initialize
This operation will restore the system to factory defaults, delete the current configuration file, and reboot
the device.
Select Device > Configuration from the navigation tree at the left side of the interface, and then click
the Initialize tab to enter the initialize confirmation page as shown in Figure 13-4 .
Figure 13-4 Initialize confirmation dialog box
Click the Restore Factory-Default Settings button to restore the system to factory defaults.