H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 83)

9-2
Table 9-1 System name configuration item
Item Description
Sysname
Set the system name, which cannot include question marks (?), less than signs (<), greater
than signs (>), backward slashes (\), double quotation marks (“), percent signs (%), single
quotation marks (‘), ampersand signs (&) or pound signs (#).
Configuring Idle Timeout Period
Select Device > Basic from the navigation tree to enter the idle timeout page, as shown in Figure 9-2 .
Figure 9-2 Configuring idle timeout period
Table 9-2 describes the idle timeout period configuration item.
Table 9-2 Idle timeout period configuration item
Item Description
Idle timeout Set the idle timeout period for a logged-in user