H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 263)

31-9
Configuring Access Service
Creating a WLAN Service
Select Wireless Service > Access Service from the navigation tree to enter the page for configuring
access service, as shown in Figure 31-9 :
Figure 31-9 Configure access service
Click New to enter the page for creating a wireless service, as shown in Figure 31-10 :
Figure 31-10 Create a wireless service
Table 31-1 shows the configuration items of creating a wireless service.
Table 31-1 Configuration items of creating a wireless service
Item Description
Wireless Service Name
Set the Service Set Identifier (SSID).
An SSID should be as unique as possible. For security, the company name
should not be contained in the SSID. Meanwhile, it is not recommended to use a
long random string as the SSID, because a long random string only adds
payload to the header field, because it only adds the Beacon frame length and
usage complexity, without any improvement to wireless security.
Wireless Service Type
Select the wireless service type:
clear: Indicates the SSID will not be encrypted.
crypto: Indicates the SSID will be encrypted.
Configuring Clear Type Wireless Service
Basic configuration of clear type wireless service
Select Wireless Service > Access Service from the navigation tree, find the clear type wireless
service in the list, and click the corresponding icon to enter the page for configuring wireless service,
as shown in Figure 31-11 .