H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 601)

49-26
Figure 49-27 Configure traffic load balancing
Select Traffic from the Loadbalance Mode drop-down list.
Type the threshold 10 and the gap 40.
Click Apply.
3) Configure a load balancing group
Select Advanced > Load Balance from the navigation tree, and then select the Load Balance Group
tab to enter the load balancing group configuration page. Then click Add, and a page as shown in
Figure 49-28 appears.
Figure 49-28 Load balancing group configuration
In the Radios Available area, select the target radios, and then click << to add them into the
Radios Selected area.
Click Apply.