H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 444)

38-9
Item Description
Secondary Server IP
Specify the IP address of the secondary server.
If no secondary server is specified, the text box displays 0.0.0.0.
To remove the previously configured secondary server, enter 0.0.0.0 in the
text box.
The specified IP address of the secondary server cannot be the same as that
of the primary server.
Secondary Server Shared Key
Specify the shared key of the secondary server. The primary server shared
key can be different from the secondary server shared key.
Secondary Server UDP Port
Specify the UDP port of the secondary server.
If the IP address of the secondary server is not specified or the specified IP
address is to be removed, the port number is 1812 for authentication or 1813
for accounting.
Secondary Server Status
Status of the secondary server, including:
active: The server is working normally.
blocked: The server is down.
If the IP address of the secondary server is not specified or the specified IP
address is to be removed, the status is blocked.
Return to RADIUS configuration task list .
Configuring RADIUS Parameters
From the navigation tree, select Authentication > RADIUS and then select the RADIUS Setup tab to
enter the RADIUS parameter configuration page, as shown in Figure 38-6 .