H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 298)

31-44
Select Authentication Server as the server type.
Enter 10.18.1.88 as the IP address of the primary authentication server
Enter 1812 as the UDP port of the primary authentication server.
Select active as the primary server status.
Click Apply.
# Configure the RADIUS accounting server.
Perform the following configuration, as shown in Figure 31-63 .
Figure 31-63 Configure the RADIUS accounting server
Select Accounting Server as the server type.
Enter 10.18.1.88 as the IP address of the primary accounting server.
Enter 1813 as the UDP port of the primary accounting server.
Select active as the primary server status.
Click Apply.
# Configure the parameters for communication between the AC and the RADIUS servers.
Select the RADIUS Setup tab and configure the parameters, as shown in Figure 31-64 .