H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 584)

49-9
Configuring WLAN Advanced Settings
Setting a District Code
Select Advanced > District Code from the navigation tree to enter the page for setting a district code,
as shown in Figure 49-7 .
Figure 49-7 Set a district code
Table 49-1 shows the configuration item of setting a district code.
Table 49-1 Configuration item of setting a district code
Item Description
District Code
Select a district code.
Configure the valid district code for a WLAN device to meet the country regulations.
If the drop-down list is grayed out, the setting is preconfigured to meet the requirements of the target
market and is locked. It cannot be changed.
Configuring AC Backup
Backup setup
Select Advanced > AC Backup from the navigation tree to enter the page for configuring AC backup,
as shown in Figure 49-8 .