H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 321)

32-12
Figure 32-16 Mesh service detailed information
Table 32-3 Mesh service output description
Field Description
Mesh Profile Number Mesh service number
Mesh ID Mesh ID of the mesh service
Binding Interface Mesh interface bound to the mesh service
MKD Service
MKD service status, which can be:
Enable: Indicates that the MKD service is enabled
Disable: Indicates that the MKD service is disabled
Link Keep Alive Interval Interval to send keep-alive packets
Link Backhaul Rate Link backhaul rate
Mesh Profile Status
Mesh service status, which can be:
Enable: Indicates that the mesh service is enabled.
Disable: Indicates that the mesh service is disabled.
Configuring a Mesh Policy
Creating a mesh policy
Select Wireless Service > Mesh Service from the navigation tree, and click the Mesh Service tab to
enter the mesh policy configuration page, as shown in Figure 32-17 :