H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 538)

46-9
Return to Line rate configuration task list .
Configuring Priority Mapping
You can configure priority mapping in two approaches:
Configuring Priority Trust Mode for Ports in bulk . In this approach, you can configure multiple ports
to look up the priority mapping tables based on a certain priority such as 802.1p carried in incoming
packets. If no packet priority is trusted, the port priority of the incoming port is used.
Changing port priority and priority trust mode for ports individually . By default, all ports are
assigned the port priority of zero. By changing the port priority of a port, you can change the priority
of the incoming packets on the port.
Configuring Priority Trust Mode for Ports in bulk
Select QoS > Trust Mode from the navigation tree to enter the priority trust mode configuration page,
as shown in Figure 46-5 .
Figure 46-5 The page for configuring priority trust mode
Table 46-5 describes the priority trust mode configuration items.