H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 445)

38-10
Figure 38-6 RADIUS parameter configuration
Table 38-5 lists the RADIUS parameters.
Table 38-5 RADIUS parameters
Item Description
Server Type
Specify the type of the RADIUS server supported by the device,
including:
extended: Specifies an extended RADIUS server (usually a CAMS or
iMC server). That is, the RADIUS client (the device) and RADIUS
server communicate using the proprietary RADIUS protocol and
packet format.
standard: Specifies a standard RADIUS server. That is, the RADIUS
client (the device) and RADIUS server communicate using the
standard RADIUS protocol and packet format defined in RFC
2138/2139 or later.
Authentication Server Shared Key
Confirm Authentication Shared Key
Specify and confirm the shared key for the authentication server. These
two parameters must have the same values.
Accounting Server Shared Key
Confirm Accounting Shared Key
Specify and confirm the shared key for the accounting server. These two
parameters must have the same values.