H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 80)

8-1
8
License
Support for the license feature may vary by device. For more information, see "Feature Matrixes" in
Compatibility Matrixes.
The sample output in this manual was created on the WX5004. The output on your device may
vary.
The grayed out functions or parameters on the Web interface indicate that they are not supported
or cannot be modified.
The models listed in this manual are not applicable to all regions. Please consult your local sales
office for the models applicable to your region.
Overview
Licenses are used on the H3C WX series access controller products to control how many APs can be
connected concurrently to a WX access controller product. The supported number of concurrent APs
depends on the device model.
Configuring License
After adding the license successfully, you need to reboot the device to make the license effective.
Select Device > License from the navigation tree to enter the license configuration page, as shown in
Figure 8-1 .