H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 41)

6-1
6
Web Overview
Support of the H3C WX series access controllers for features may vary by device model. For more
information, see "Feature Matrixes" in Compatibility Matrixes.
The sample output in this manual was created on the WX5004. The output on your device may
vary.
The grayed out functions or parameters on the Web interface indicate that they are not supported
or cannot be modified.
The models listed in this manual are not applicable to all regions. Please consult your local sales
office for the models applicable to your region.
Overview
Hangzhou H3C Technologies Co., Ltd. (hereinafter referred to as H3C) provides the Web-based
network management function to facilitate the operations and maintenance on H3C’s network devices.
Through this function, the administrator can visually manage and maintain network devices through the
Web-based configuration interfaces.
Figure 6-1 shows a Web-based network management operating environment:
Figure 6-1 Web-based network management operating environment
Logging In to the Web Interface
The device is provided with the default Web login information. You can use the default information to log
in to the Web interface. The default Web login information is:
Username: admin
Password: admin
IP address of the device: 192.168.0.100.
You can follow the steps below to log in to the device through the Web interface.
1) Connect the device and PC
Connect the Ethernet interface of the device to the PC using a crossover Ethernet cable.