H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 331)

32-22
Figure 32-32 Configure a pre-shared key
Select Pass Phrase, and set the pre-shared key to 12345678.
Click Apply.
# Bind an AP radio to the mesh service
Select Wireless Service > Mesh Service from the navigation tree, click the Mesh Service tab, click
the binding icon on the right of the mesh service outdoor to enter the page for binding an AP radio to a
mesh service, as shown in Figure 32-33 :
Figure 32-33 Bind an AP radio to a mesh service
Select the AP radios to be bound, and click Bind.
# Enable the mesh service
Select Wireless Service > Mesh Service from the navigation tree, and click the Mesh Service tab to
enter the mesh service configuration page, as shown in Figure 32-34 :
Figure 32-34 Enable the mesh service
Select the mesh service to be enabled, and click Enable.
3) Configure a mesh policy