H3C Technologies H3C WX6000 Series Access Controllers User Manual
Page 282
31-28
Figure 31-27 Create an AP
Set the AP name to ap.
Select the AP model WA2220X-AG.
Select the serial ID as manual, and type the serial ID of the AP.
Click Apply.
2) Configure wireless service
# Create a wireless service
Select Wireless Service > Access Service from the navigation tree, and click New to enter the page
for creating a wireless service, as shown in
:
Figure 31-28 Create a wireless service
Set the service name to service1.
Select the wireless service type clear.
Click Apply.
# Enable wireless service
Select Wireless Service > Access Service from the navigation tree to enter the page for enabling
wireless service, as shown in
:
This manual is related to the following products: