N in, Figure 31-47 – H3C Technologies H3C WX6000 Series Access Controllers User Manual
Page 291
31-37
Figure 31-47 Create an AP
Set the AP name to ap.
Select the AP model WA2220X-AG.
Select the serial ID as manual, and type the AP serial ID.
Click Apply.
2) Configure wireless service
# Create a wireless service
Select Wireless Service > Access Service from the navigation tree, and click New to enter the page
for creating a wireless service, as shown in
:
Figure 31-48 Create a wireless service
Set the service name to psk.
Select the wireless service type crypto.
Click Apply.
# Configure wireless service.
After you create a wireless service, you will enter the wireless service configuration page. You need to
perform security setup when configuring PSK authentication, as shown in
This manual is related to the following products: