H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 325)

32-16
Figure 32-21 Mesh policy detailed information
Table 32-7 Mesh policy output description
Field Description
MP Policy Name Name of the mesh policy
Mesh Link Initiation Whether link initiation is enabled or not
Mlsp
Mobile Link Switch Protocol (MLSP) status, which can be:
Enable: Indicates that MLSP is enabled
Disable: Indicates that MLSP is disabled
Authenticator Role
Authenticator role status, which can be:
Enable: Indicates that the authenticator role is enabled
Disable: Indicates that the authenticator role is disabled
Max Links Maximum number of links on a device using this mesh policy
Probe Request Interval (ms) Interval between probe requests sent by a device using this mesh policy
Link Hold RSSI Link hold RSSI
Link Hold Time (ms) Link hold time
Link Switch Margin Link switch margin
Link saturation RSSI Link saturation RSSI
Link rate-mode
Method of calculating the link cost, which can be:
Fixed: Indicates that the mesh interface rate is fixed.
real-time: Indicates that the mesh interface rate changes with the RSSI
in real-time.