H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 74)

7-13
Field Description
Current Number of
Radios
Number of radios in use on the AP
Client Keep-alive Interval
Interval to detect clients segregated from the system due to various reasons such
as power failure or crash, and disconnect them from the AP
Client Idle Interval(s)
If the client is idle for more than the specified interval, that is, if the AP does not
receive any data from the client within the specified interval, the client will be
removed from the network.
Broadcast-probe Reply
Status
Whether the AP is enabled to respond to broadcast probe requests or not
Basic BSSID MAC address of the AP
Current BSS Count Number of BSSs connected with the AP
Running Clients Count Number of clients currently running
Wireless Mode Wireless mode: 802.11a, 802.11b, or 802.11g
Client Dot11n-only
Enabled: Only 802.11n clients can be associated with the AP.
Disabled: 802.11a/b/g/n clients can be associated with the AP.
Channel Band-width Channel bandwidth, 20 MHz or 40 MHz.
Short GI for 20MHz Whether the AP supports short GI when it operates in 20 MHz mode.
Short GI for 40MHz Whether the AP supports short GI when it operates in 40 MHz mode.
Mandatory MCS Set Mandatory MCS for the AP
Supported MCS Set Supported MCS for the AP
Configured Channel
Operating channel of the radio:
If the channel is manually configured, the configured channel number is
displayed.
If the auto channel selection mode is adopted, auto(channel) is displayed.
channel in the brackets is the optimum channel automatically selected by the
AC.
Configured Power(dBm)
Transmission power on the radio
If one-time (transmit power control) is adopted, the configured transmit power
is displayed;
If auto TPC is adopted, two values are displayed, with the first being the
maximum power, and the second auto (number), where number in the
brackets represents the actual power.
Interference (%) Interference observed on the operating channel, in percentage
Channel Load (%) Load observed on the operating channel, in percentage
Utilization (%) Utilization rate of the operating channel, in percentage
Co-channel Neighbor
Count
Number of neighbors found on the operating channel
Channel Health Status of the channel
Preamble Type Type of preamble that the AP can support: short or long
Radio Policy Radio policy used
Service Template Service template number
SSID SSID for the ESS
Port WLAN-DBSS interface associated with the service template
Mesh Policy Mesh policy adopted