H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 264)

31-10
Before configure a clear-type wireless service, disable it first and then click the corresponding icon.
Figure 31-11 Configure clear type wireless service
Table 31-2 shows the configuration items of basic configuration of clear type wireless service.
Table 31-2 Configuration items of basic configuration of clear type wireless service
Item Description
Wireless Service Displays the selected Service Set Identifier (SSID).
VLAN (Untagged)
Set the ID of the VLAN whose packets are to be sent untagged. VLAN (Untagged)
indicates that the port sends the traffic of the VLAN with the VLAN tag removed.
Default VLAN
Set the default VLAN of a port.
By default, the default VLAN of all ports is VLAN 1. You can configure the default
VLAN as needed.
Delete VLAN Removes the VLAN of a port.
SSID HIDE
Enable: Disables the advertisement of the SSID in beacon frames.
Disable: Enables the advertisement of the SSID in beacon frames.
By default, the SSID is advertised in beacon frames.
If the advertising of the SSID in beacon frames is disabled, the SSID must be
configured for the clients to associate with the AP.
Disabling the advertising of the SSID in beacon frames does little good to
wireless security.
Advanced configuration of clear type wireless service
Select Wireless Service > Access Service from the navigation tree, find the clear type wireless
service in the list, and click the corresponding icon to enter the page for advanced settings of clear
type wireless service, as shown in Figure 31-12 .