H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 591)

49-16
Figure 49-14 Configure a load balancing group
Table 49-8 shows the load balancing group configuration items.
Table 49-8 Load balancing group configuration items
Item Remarks
Group ID Displays the ID of the load balancing group
Description
Configure a description for the load balancing group.
By default, the load balancing group has no description.
Radio List
In the Radios Available area, select the target radios, and then click << to add them
into the Radios Selected area.
In the Radios Selected area, select the radios to be removed, and then click >> to
remove them from the load balancing group.
Configuring AP
Setting AP version
Select Advanced > AP from the navigation tree, click the AP Module tab, select the desired AP, and
then click Version Update to enter the page for AP version upgrade.
Table 49-9 shows the configuration items of AP upgrade.
Table 49-9 Configuration items of AP version upgrade
Item Description
AP Model Displays the selected AP model.
Software Version Type the software version of the AC in a correct format.
Switching to fat AP
Select Advanced > AP Setup from the navigation tree, select the Switch to Fat AP tab, select the
desired AP, and then click Switch to Fat AP to perform AP working mode switchover.