H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 552)

47-2
Configuration Procedure
1) Configure the time range
# Define a time range to cover the time range from 8:00 to 18:00 every day.
Select QoS > Time Range from the navigation tree and click Create. Perform configuration as
shown in Figure 47-2 .
Figure 47-2 Define a time range covering 8:00 to 18:00 every day
Type the time range name test-time.
Select the Periodic Time Range check box, set the Start Time to 8:00 and the End Time to 18:00,
and then select the checkboxes Sun through Sat.
Click Apply.
2) Define an IPv4 ACL for traffic to the FTP server.
# Create an advanced IPv4 ACL.
Select QoS > ACL IPv4 from the navigation tree and click Create. Perform configuration as shown
in Figure 47-3 .