H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 296)

31-42
Figure 31-58 Add a MAC authentication list
Add a local user in the MAC Address box. 00-14-6c-8a-43-ff is used in this example.
Click Add.
4) Bind an AP radio to a wireless service
Select Wireless Service > Access Service from the navigation tree, and click Bind at the right side of
the wireless service service1 to enter the page for binding an AP radio, as shown in Figure 31-59 :
Figure 31-59 Bind an AP radio
Select the check box before ap with radio mode 802.11g.
Click Bind.
5) Enable 802.11g radio
Select Radio > Radio from the navigation tree to enter the radio setup page, as shown in Figure 31-60 .
Figure 31-60 Enable 802.11g radio
Find the AP with the corresponding radio mode and select the ap 802.11g check box.
Click Enable