H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 285)

31-31
Select AP > AP Setup from the navigation tree, and click Create to enter the page for creating an AP,
as shown in Figure 31-34 :
Figure 31-34 Create an AP
Set the AP name to ap.
Select the AP model WA2220X-AG.
Select the serial ID as auto.
Click Apply.
2) Configure wireless service
# Create a wireless service
Select Wireless Service > Access Service from the navigation tree, and click New to enter the page
for creating a wireless service, as shown in Figure 31-35 :
Figure 31-35 Create a wireless service
Set the service name to service1.
Select the wireless service type clear.
Click Apply.
# Enable wireless service
Select Wireless Service > Access Service from the navigation tree to enter the page for enabling
wireless service, as shown in Figure 31-36 :