H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 428)

37-6
Item Description
PPP AuthN
Name
Secondary Method
Configure the authentication method and secondary authentication method for
PPP users.
Options include:
HWTACACS: Performs HWTACACS authentication. You need to specify the
HWTACACS scheme to be used.
Local: Performs local authentication.
None: All users are trusted and no authentication is performed. Generally, this
mode is not recommended.
RADIUS: Performs RADIUS authentication. You need to specify the RADIUS
scheme to be used.
Not Set: Uses the default authentication methods.
Portal AuthN
Name
Configure the authentication method for portal users.
Options include:
None: All users are trusted and no authentication is performed. Generally, this
mode is not recommended.
RADIUS: Performs RADIUS authentication. You need to specify the RADIUS
scheme to be used.
Not Set: Uses the default authentication methods.
Return to Configuration Task List .
Configuring Authorization Methods for the ISP Domain
Select Authentication > AAA from the navigation tree and then select the Authorization tab to enter
the authorization method configuration page, as shown in Figure 37-4 .
Figure 37-4 Authorization method configuration page
Table 37-4 describes the configuration items for configuring the authorization methods for an ISP
domain.
Table 37-4 Authorization method configuration items
Item Description
Select an ISP
domain
Select the ISP domain for which you want to specify authentication methods.