H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 537)

46-8
Figure 46-4 The page for configuring line rate on a port
Table 46-4 describes the configuration items for configuring line rate on a port.
Table 46-4 Configuration items for configuring line rate on a port
Item Description
Please select an interface type
Select the types of interfaces to be configured with line rate.
The interface types available for selection depend on your device model.
Rate Limit
Enable or disable line rate on the specified port.
Enable: Enables line rate on all selected ports.
Disable: Disables line rate on all selected ports.
Direction Outbound: Limits the rate of packets sent by the specified port.
CIR Set the committed information rate (CIR), the average traffic rate.
CBS
Set the committed burst size (CBS), number of bits that can be sent in each
interval.
EBS
Set the excess burst size (EBS).
EBS is available when the CBS option is selected.
Please select port(s)
Specify the ports to be configured with line rate
Click the ports to be configured with line rate in the port list. You can select
one or more ports.