H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 34)

5-7
Figure 5-6 RADIUS configuration page
Table 5-5 lists the configuration items of the RADIUS configuration page.
Table 5-5 Configuration items of the RADIUS configuration page
Item Description
Service Type
Select the type of the RADIUS server.
Two types are available: standard and enhanced:
extended: Specifies extended RADIUS server, which is usually a CAMS iMC.
In this case, the RADIUS client (access device) and the RADIUS server
exchange packets based on the specifications and packet format definitions of
a private RADIUS protocol.
standard: Specifies the standard RADIUS server. In this case, the RADIUS
client (access device) and the RADIUS server exchange packets based on the
specifications and packet format definitions of the standard RADIUS protocols
(RFC 2138, RFC 2139, and the updates).
Authentication IP Type the IP address of the RADIUS authentication server.
Authentication UDP Port Type the port number of the RADIUS authentication server.
Authentication Key Type the shared key of the RADIUS authentication server.
Accounting IP Type the IP address of the RADIUS accounting server.
Accounting UDP Port Type the port number of the RADIUS accounting server.
Accounting Key Type the shared key of the RADIUS accounting server.
Portal Configuration
On the wireless configuration page, select Portal for the Primary Service Authentication Type field,
and then click Next to enter the RADIUS configuration page. After you complete RADIUS configuration,
click Next to enter the portal configuration page, as shown in Figure 5-7 .