H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 529)

45-17
Item Description
Time Range
Select the time range during which the rule takes effect.
Available time ranges are those that have been configured.
Return to IPv6 ACL configuration task list .
Configuration Guidelines
When configuring an ACL, note that:
1) When defining rules in an ACL, you do not necessarily assign them numbers; the system can do
this automatically. Refer to ACL Step .
2) You cannot create a rule with, or modify a rule to have, the same permit/deny statement as an
existing rule in the ACL.
3) You can only modify the existing rules of an ACL that uses the match order of config. When
modifying a rule of such an ACL, you may choose to change just some of the settings, in which
case the other settings remain the same.