H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 37)

5-10
Table 5-7 Configuration items of the encryption configuration page
Item Description
Provide Key
Automatically
Select whether to use an automatically provided WEP key.
Enable: Use an automatically provided WEP key.
Disable: Use a static WEP key.
By default, a static WEP key is used.
If you select to use an automatically provided WEP key, WEP104 will be selected
as the WEP key type.
If you want to select Enable from this drop-down list, you must first select the User
authentication (802.1X) option from the Primary Service Authentication type
drop-down list on the wireless configuration page.
WEP
Select the key type of the WEP encryption mechanism, which can be WEP40,
WEP104, and WEP 128.
Key ID
Select the WEP key index, which can be 1, 2, 3, or 4. Each number represents one
of the four static keys of WEP. The selected key index will be used for frame
encryption and decryption
Key Length
Select the key length.
When the key type is WEP40, the key length can be five alphanumeric
characters or ten hexadecimal characters.
When the key type is WEP104, the key length can be 13 alphanumeric
characters or 26 hexadecimal characters.
When the key type is WEP128, the key length can be 16 alphanumeric
characters or 32 hexadecimal characters.
WEP Key Type the WEP key.
Guest Wireless Network Configuration
On the encryption configuration page, click Next to enter the guest wireless network configuration page,
as shown in Figure 5-9 .