H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 319)

32-10
Figure 32-13 Configure mesh service
Table 32-2 shows the configuration items of mesh service.
Table 32-2 Configuration items of mesh service
Item Description
Mesh Service Displays the selected mesh service name.
VLAN (Tagged)
Set the ID of the VLAN whose packets are to be sent tagged. VLAN (Tagged)
indicates that the port sends the traffic of the VLAN without removing the VLAN tag.
VLAN (Untagged)
Set the ID of the VLAN whose packets are to be sent untagged. VLAN (Untagged)
indicates that the ports send the traffic of the VLAN with the VLAN tag removed.
Default VLAN
Set the default VLAN.
By default, the default VLAN of all ports is VLAN 1. You can configure the default
VLAN as needed.
Exclude VLAN Removes the IDs of the VLANs whose packets are to be sent untagged and tagged.
Mesh Route Mesh loop detection algorithm
Link Keep Alive Interval Configure the mesh link keep-alive interval
Link Backhaul Rate Configure the backhaul radio rate
Security Configuration
Pass Phrase Input a pre-shared key in the format of character string.
Raw Key Input a pre-shared key in the format of hexadecimal digits.
Preshared Key
Pre-shared key.
A string of 8 to 63 characters, or
A valid hexadecimal number of 64 bits