H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 82)

9-1
9
Device Basic Information Configuration
Support of the H3C WX series access controllers for features may vary by device model. For more
information, see "Feature Matrixes" in Compatibility Matrixes.
The sample output in this manual was created on the WX5004. The output on your device may
vary.
The grayed out functions or parameters on the Web interface indicate that they are not supported
or cannot be modified.
The models listed in this manual are not applicable to all regions. Please consult your local sales
office for the models applicable to your region.
Overview
The device basic information feature allows you to:
Set the system name of the device
Set the idle timeout period for a logged-in user. That is, the system will log an idle user off the Web
for security purpose after the configured period.
Configuring Device Basic Information
Configuring System Name
Select Device > Basic from the navigation tree to enter the system name page, as shown in Figure 9-1 .
Figure 9-1 System name
Table 9-1 describes the system name configuration item.