User isolation configuration example, Network requirements, Configuration procedure – H3C Technologies H3C WX6000 Series Access Controllers User Manual
Page 511: Figure 44-3
44-4
Figure 44-3 Display user isolation summary
User Isolation Configuration Example
Network requirements
As shown in
, it is required to isolate Client A, Client B, and Host A in VLAN 2 from one
another while allowing them to access the Internet. The MAC address of the gateway is
000f-e212-7788.
Figure 44-4 Network diagram for configuring user isolation
AP
Client A
Client B
AC
Host A
Gateway
VLAN 2
Internet
MAC: 000f-e212-7788
Configuration procedure
1) Configure wireless service
For how to configure wireless service, see Wireless Service.
2) Configure user isolation
This manual is related to the following products: