H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 145)

20-4
Table 20-1 Configuration items for creating a MAC address entry
Item Description
MAC Set the MAC address to be added.
Type
Set the type of the MAC address entry, which can be:
static: Indicates static MAC address entries that never age out.
dynamic: Indicates dynamic MAC address entries that will age out.
blackhole: Indicates blackhole MAC address entries that never age out.
The types of the MAC address entries displayed in the tab are as follows:
Config static: Indicates static MAC address entries manually configured by the users.
Config dynamic: Indicates dynamic MAC address entries manually. configured by the users.
Blackhole: Indicates blackhole MAC address entries.
Learned: Indicates dynamic MAC address entries learned by the device.
Other: Indicates types other than the ones mentioned above.
VLAN Sets the ID of the VLAN to which the MAC address belongs.
Port Sets the port to which the MAC address belongs.
Setting the Aging Time of MAC Address Entries
Select Network > MAC from the navigation tree, and then select the Setup tab to enter the page for
setting the MAC address entry aging time, as shown in Figure 20-4 .
Figure 20-4 Set the aging time for MAC address entries
The following table shows the detailed configuration of setting the MAC address entry aging time.
Table 20-2 Configuration items of setting the aging time for a MAC address entry
Item Description
No-aging Specify that the MAC address entry never ages out.
Aging time Set the aging time for the MAC address entry.
MAC Address Configuration Examples
Network requirements
Use the MAC address table management function of the Web-based NMS. It is required to add a static