H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 205)

26-10
Figure 26-8 Create a static address pool
Table 26-1 describes the static address pool configuration items.
Table 26-1 Static address pool configuration items
Item Description
IP Pool Name Type the name of a static address pool.
IP Address
Mask
Type an IP address and select a subnet mask for the static address pool.
The IP address cannot be the IP address of any interface on the DHCP server.
Otherwise, an IP address conflict may occur and the bound client cannot obtain an
IP address correctly.
Client MAC Address
Client ID
Configure the client MAC address or the client ID for the static address pool
The client ID must be identical to the ID of the client to be bound. Otherwise, the
client cannot obtain an IP address.
Client Domain Name
Type the domain name suffix for the client.
With the suffix assigned, the client only needs to input part of a domain name, and
the system will add the domain name suffix for name resolution.
Gateway Address
Type the gateway addresses for the client.
A DHCP client that wants to access an external host needs to send requests to a
gateway. You can specify gateways in each address pool and the DHCP server will
assign gateway addresses while assigning an IP address to the client.
Up to eight gateways can be specified in a DHCP address pool, separated by
commas.
DNS Server Address
Type the DNS server addresses for the client.
To allow the client to access a host on the Internet through DNS, you need to specify
a DNS server address.
Up to eight DNS servers can be specified in a DHCP address pool, separated by
commas.