H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 418)

36-22
Figure 36-22 Create a wireless service
Type the wireless service name 1.
Select clear as the wireless service type.
Click Apply.
The wireless service configuration page appears. Configure parameters for the wireless service as
shown in Figure 36-23 .
Figure 36-23 Configure parameters for the wireless service
Type 2 in the textbox of VLAN (Untagged).
Type 2 in the textbox of Default VLAN.
Click Apply. A configuration progress dialog box appears, as shown in Figure 36-24 .