H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 93)

12-1
12
Syslog
Support of the H3C WX series access controllers for features may vary by device model. For more
information, see "Feature Matrixes" in Compatibility Matrixes.
The sample output in this manual was created on the WX5004. The output on your device may
vary.
The grayed out functions or parameters on the Web interface indicate that they are not supported
or cannot be modified.
The models listed in this manual are not applicable to all regions. Please consult your local sales
office for the models applicable to your region.
Overview
System logs contain a large amount of network and device information, including running status and
configuration changes. System logs are an important way for administrators to know network and
device status. With system log information, administrators can take corresponding actions against
network problems and security problems.
System logs can be stored in the log buffer, or sent to the loghost.
Configuring System Logs
Configuration Task List
Perform the tasks in Table 12-1 to configure system logs.
Table 12-1 System logs configuration task list
Task Description
Setting Syslog Related
Parameters
Optional
Set the number of logs that can be stored in the log buffer.
Set the refresh period of the log information displayed on the Web interface.
Displaying Syslog Display detailed information of system logs.
Setting Loghost
Optional
Set the loghost that can receive system logs.