H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 76)

7-15
Figure 7-11 Display client detailed information
Table 7-10 Description on the fields of client information
Field Description
MAC address MAC address of the client
AID Association ID of the client
AP Name Name of the AP
Radio Id Client-associated radio ID
SSID SSID associated with the client
BSSID Basic SSID
Port WLAN-DBSS interface associated with the client
VLAN VLAN to which the client belongs
State State of the client such as running; Backup indicates a backup client.
Power Save Mode Client’s power save mode: active or sleep
Wireless Mode Wireless mode such as 802.11a, 802.11b, 802.11g, 802.11an, or 803.11gn
Channel Band-width Channel bandwidth, 20 MHz or 40 MHz.
SM Power Save Enable
SM Power Save enables a client to have one antenna in the active state, and
others in sleep state to save power.
Enabled: SM Power Save is supported.
Disabled: SM Power Save is not supported.
Short GI for 20MHz Whether the client supports short GI when its channel bandwidth is 20 MHz.
Short GI for 40MHz Whether the client supports short GI when its channel bandwidth is 40 MHz.
Support MCS Set MCS supported by the client
BLOCK ACK-TID 0
BLOCK ACK is negotiated based on QoS priority ID 0:
OUT: Outbound direction
IN: Inbound direction
BOTH: Both directions