Figure 31-73 – H3C Technologies H3C WX6000 Series Access Controllers User Manual
Page 304
31-50
Figure 31-73 Enable 802.11g radio
Find the AP whose radio is to be enabled, and select the corresponding check box.
Click Enable.
8) Configure the RADIUS server (iMC)
The following takes the iMC (iMC PLAT 3.20-R2602 and iMC UAM 3.60-E6102) as an example to
illustrate the basic configuration of the RADIUS server.
# Add an access device.
Log in to the iMC management platform. Select the Service tab, and then select Access Service >
Access Device from the navigation tree to enter the access device configuration page. Click Add on
the page to enter the configuration page as shown in
:
Input expert as the Shared Key.
Add ports 1812, and 1813 for Authentication Port and Accounting Port respectively.
Select LAN Access Service for Service Type.
Select H3C for Access Device Type.
Select or manually add the access device (the AC) with the IP address 10.18.1.1.