H3C Technologies H3C WX6000 Series Access Controllers User Manual
Page 457
39-4
# Enable the EAP server, configure the authentication method as TLS, and the PKI domain as test.
Select Authentication > Local EAP Server from the navigation tree to enter the local EAP server
configuration page and configure the following as shown in
.
Figure 39-4 Configure a local EAP server
Select Enabled for the EAP server status.
Select TLS from the Available methods list and click << to add TLS to the Selected methods list.
Select test from the PKI domain drop-down list.
Click Apply.
4) Configure the AP.
# Create an AP.
Select AP > AP Setup. Then click Add to enter the page and perform the following configuration as
shown in
.
Figure 39-5 Configure the AP
Type wa2200 as the AP name.
Select WA2220X-AG as the device model.
Select manual and type the serial number in the text box.
Click Apply.