H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 519)

45-7
Creating an IPv4 ACL
Select QoS > ACL IPv4 from the navigation tree and then select the Create tab to enter the IPv4 ACL
configuration page, as shown in Figure 45-2 .
Figure 45-2 The page for creating an IPv4 ACL
Table 45-8 describes the configuration items for creating an IPv4 ACL.
Table 45-8 IPv4 ACL configuration items
Item Description
ACL Number Set the number of the IPv4 ACL.
Match Order
Set the match order of the ACL. Available values are:
Config: Packets are compared against ACL rules in the order that the rules are
configured.
Auto: Packets are compared against ACL rules in the depth-first match order.
Return to IPv4 ACL configuration task list .
Configuring a Rule for a Basic IPv4 ACL
Select QoS > ACL IPv4 from the navigation tree and then select the Basic Setup tab to enter the rule
configuration page for a basic IPv4 ACL, as shown in Figure 45-3 .