H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 26)

4-3
Table 4-2 Feature matrix for the WX6000 series
Module Feature WX6103 LSQM1WCMB0 LSBM1WCM2A0 LSRM1WCM2A1
Summary Summary
IPv6
supported
IPv6 supported IPv6 not supported IPv6 supported
License
The
WX6103
supports 128
concurrent
APs by
default, and
can be
extended to
support 640
concurrent
APs.
The
LSQM1WCMB0
supports 128
concurrent APs by
default, and can
be extended to
support 640
concurrent APs.
The
LSBM1WCM2A0
supports 128
concurrent APs by
default, and can be
extended to support
640 concurrent APs. The
LSRM1WCM2A1
supports 128
concurrent APs by
default, and can be
extended to support
640 concurrent APs.
File
manageme
nt
CF and USB
supported CF and USB
supported CF and USB
supported CF and USB
supported
Interface
manageme
nt
Configuratio
n of IPv6
address for
an interface
is supported.
Configuration of
IPv6 address for
an interface is
supported. Configuration of
IPv6 address for an
interface is not
supported. Configuration of IPv6
address for an
interface is
supported.
Port
mirroring Not
supported
Not supported Not supported Not supported
SNMP
Configuratio
n of IPv6
destination
addresses is
supported
Configuration of
IPv6 destination
addresses is
supported Configuration of
IPv6 destination
addresses is not
supported Configuration of IPv6
destination
addresses is
supported
Device
Loopback
test
Internal
loopback
testing
supported
on XGE
interfaces
only
Internal loopback
testing supported
on XGE interfaces
only
Internal loopback
testing supported on
XGE interfaces only Internal loopback
testing supported on
XGE interfaces only
IPv6
routing
Supported Supported Not supported Supported
Network
Diagnostic
tools IPv6 ping
supported IPv6 ping
supported IPv6 ping not
supported
IPv6 ping supported
ACL IPv6 Supported Supported Not supported Supported
QoS
Line rate Supported Supported Supported Supported
Advanced AC backup Supported Supported Supported Supported
High
availability Stateful
failover
Supported Supported Supported Supported