H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 603)

49-28
Figure 49-30 Create an AP
Type ap1 as the name for the AP.
Select the model WA2220X-AG.
Select manual from the Serial ID drop-down list and type the AP serial ID in the text box.
Click Apply.
# Configure AP to work in monitor mode.
Select Security > Rogue Detection from the navigation tree, and then select the AP Monitor tab. On
the page, select the AP to be configured and click the icon to enter the page for configuring the work
mode, as shown in Figure 49-31 .
Figure 49-31 Set the work mode
Select Monitor as the work mode.
Click Apply.
# Enable 802.11g.
Select Radio > Radio from the navigation tree to enter the page for configuring radio, as shown in
Figure 49-32 .
Figure 49-32 Enable 802.11g
Locate the target APs and select the check boxes before the APs.