H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 131)

18-11
Figure 18-14 Create an SNMP user
Table 18-7 describes the configuration items for creating an SNMP user.
Table 18-7 Configuration items for creating an SNMP user
Item Description
User Name Set the SNMP user name.
Security Level
Select the security level for the SNMP group. The available security levels are:
NoAuth/NoPriv: No authentication no privacy.
Auth/NoPriv: Authentication without privacy.
Auth/Priv: Authentication and privacy.
Group Name
Select an SNMP group to which the user belongs.
When the security level is NoAuth/NoPriv, you can select an SNMP group
with no authentication no privacy.
When the security level is Auth/NoPriv, you can select an SNMP group with
no authentication no privacy or authentication without privacy.
When the security level is Auth/Priv, you can select an SNMP group of any
security level.
Authentication Mode
Select an authentication mode (including MD5 and SHA) when the security level
is Auth/NoPriv or Auth/Priv.
Authentication Password
Confirm Authentication
Password
Set the authentication password when the security level is Auth/NoPriv or
Auth/Priv.
The confirm authentication password must be the same with the authentication
password.
Privacy Mode
Select a privacy mode (including DES56, AES128, and 3DES) when the security
level is Auth/Priv.
Privacy Password
Confirm Privacy Password
Set the privacy password when the security level is Auth/Priv.
The confirm privacy password must be the same with the privacy password.