H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 464)

40-3
Figure 40-2 Local user configuration page
Table 40-1 describes the configuration items for creating a local user.
Table 40-1 Local user configuration items
Item Description
Username Specify a name for the local user.
Password
Confirm
Specify a password for the local user and confirm the password.
The two passwords must be identical.
It is recommended not specify a command starting with spaces because spaces at the
beginning of the password string will be ignored, but they count at the user login page.
Group
Select a user group for the local user.
For information about user group configuration, refer for Configuring a User Group .
Service-type
Select the service types for the local user to use, including FTP, Telnet, PPP, Portal,
LAN access (accessing through the Ethernet, such as 802.1x users), and SSH.
If you do not specify any service type for a local user who uses local authentication,
the user cannot pass authentication and therefore cannot log in.
Telnet must be selected for a local user to access the device through Web.
Expire-time
Specify an expiration time for the local user, in the format HH:MM:SS-YYYY/MM/DD.
When authenticating a local user with the expiration time argument configured, the
access device checks whether the expiration time has elapsed. If not, the device
permits the user to log in.