Inter-ac roaming, Intra-fa roaming – H3C Technologies H3C WX6000 Series Access Controllers User Manual
Page 339

33-3
Inter-AC roaming
Figure 33-2 Inter-AC roaming
As shown in the above figure:
1) A station is associated with AP1, which is connected to AC 1.
2) The station disassociates with AP1 and roams to AP2.
3) The station is associated with AP2 through inter-AC roam association. Prior to inter-AC roaming,
AC1 should synchronize the station information with AC2 over an IACTP tunnel.
Intra-FA roaming
Figure 33-3 Intra-FA roaming
1) A station is associated with AP 1, which is connected to AC 1.
This manual is related to the following products: